When choosing equipment for exhaust gas purification, the following factors must be considered:

1. Exhaust gas composition: Different exhaust gas components require different treatment methods. For example, organic exhaust gases can be treated with activated carbon adsorption or catalytic oxidation, while acid exhaust gases must be treated with alkaline washing or acid gas purification.

2. Exhaust gas concentration. The concentration of exhaust gas will also affect the selection of equipment. High concentration of exhaust gas requires the use of equipment with higher performance capacity.

3. Processing effect requirements: According to the environmental protection requirements and the specific conditions of the enterprise, determine the requirements for the exhaust purification effect. For example, in some places, higher requirements for exhaust emission standards require the use of more modern processing equipment.

4. Equipment cost: Equipment cost includes purchase, installation, operation and maintenance costs. It is necessary to comprehensively consider the performance and cost of equipment and choose cost-effective equipment.

5. Equipment reliability: Exhaust gas purification equipment requires long-term stable operation, so it is necessary to choose equipment with high reliability.

6. Equipment operation and maintenance: It is also necessary to take into account the operation and maintenance of equipment. The choice of equipment, which is easy to operate and convenient to maintain, can reduce the operating cost of the enterprise.

In general, the choice of exhaust gas purification equipment requires a comprehensive consideration of several factors and the selection of equipment suitable for your own corporate situation.

When installing and using exhaust gas purification equipment, the following precautions should be taken:

1. Equipment selection:

Suitable exhaust gas purification equipment should be selected according to factors such as the type, nature and emissions of exhaust gases. Different waste gases should use different treatment technologies to ensure that the treatment results are in line with expectations.

2. Equipment layout:

Reasonably plan the location and location of the equipment to ensure the distance between the equipment for operation and maintenance. At the same time, the exhaust gas transmission path should be considered to reduce the transportation pressure in the pipeline and avoid cross-contamination.

3. Basic conditions:

The equipment must have a solid base capable of withstanding the weight and vibration of the equipment. Before installation, the foundation must be inspected and processed, and enough space must be reserved for equipment maintenance and repair.

4. Environmental requirements:

The installation site of the equipment must be well ventilated to ensure emission control and air quality. At the same time, safety measures should be taken to prevent fires and explosions.

5. Import and export of pipelines:

When designing and installing imported and export pipelines, factors such as flow rate, exhaust gas temperature and pressure must be considered, and suitable materials and sizes must be selected to ensure the smooth operation of the pipeline and the reliability of the connection.

6. Operating procedures:

Strictly follow technological rules, safety rules and operating procedures. Operators must be familiar with the specifications in the operating manual and work according to the rules.

7. Protection measures:

The exhaust gas purification equipment inside and outside the room must take the necessary protective measures. For example, outdoor equipment must have a raincoat to prevent engine moisture, important components such as water pumps and motors must also be waterproof.

8. Maintenance inspection:

Periodically check and maintain the equipment, timely detection and elimination of equipment faults, ensuring the normal operation of the equipment.

9. Fan and Pipeline:

Fan and pump wiring should be correct to ensure precise steering and not overturning to prevent engine damage and accidents. The pipeline should be installed as flat as possible to reduce wind resistance.

10. Filter problem:

The wind resistance of the filter should be measured at the scene. Excessive wind resistance will lead to insufficient ventilation and affect the cleaning effect.

11. Emphasis on outdoor installation:

Measures against direct sunlight and rain are important to prevent the impact on the performance and service life of the equipment.

12. Number of air intakes:

Several air intakes are more reliable than one air intake, but they also need to be designed according to the actual situation.

13. Policies and rules:

The installation and use of exhaust gas treatment equipment is a reflection of the government's response to environmental protection, environmental protection and the satisfaction of the wishes of the masses, and is a manifestation of corporate social responsibility.

The working principle is as follows: create a special hot oxidation furnace so that it has a certain heat storage capacity, and focus on exhaust gas treatment (mainly based on actual reports),

Degradable exhaust gases (mostly actual reports) in a high-temperature environment can control the decomposition rate of up to 9% so that the exhaust gases (mostly actual reports) meet the relevant environmental protection standards and are discharged into the air.

In the application process of RTO, it is necessary to install two fixed forms of heat exchange layers made of ceramic materials with the advantages of heat accumulation,

Convenient (mainly actual reporting) exhaust gas treatment. (Mainly the actual report) After passing through the layer of the ceramic medium, the exhaust gas will be heated. In the case of heat exchange, another layer of the medium will also be heated, and the heat exchange rate can reach 90%.

At the same time, when applying oxidation furnace equipment, it has a certain self-maintenance ability, does not require any fuel to maintain the problem and improve its efficiency.